(630) 280-6633

Titan Waters Reverse Osmosis Systems

What is Reverse Osmosis?

The real flavor of water refreshes and satisfies. But today, enjoying a drink of water may not be as simple as filling your glass from the tap. Even when treated by an approved municipal water system, minerals, organic matter or chlorine often mars the goodness of water.

Reverse Osmosis is a filtration process used for water. It works by using pressure to force a solution through a membrane, retaining the solute (dissolved solids) on one side and allowing the treated solvent (water) to pass to the other side.

The membranes used for reverse osmosis water systems have a dense barrier designed to allow only water to pass through while preventing the passage of solutes (such as salt ions). This process requires that a high pressure be exerted on the high concentration side of the membrane. Contact us today.

The Final Barrier

Safer and cleaner tasting water

Both Titan Waters Reverse Osmosis systems have the same contaminant rate of reduction. *

Titan Reverse Osmosis drinking water systems come with, NSF certified, 50- GPD membrane, plastic storage tank, dedicated faucet, saddle valves, all lines and instructions.

"President's Cancer Panel is recommending that people use home Filtering devices to decrease exposure to cancer-causing agents."
PCP Report 2008-2009

This is why you need the protection reverse osmosis technology provides!

Reverse Osmosis systems typically reduce: *

Aluminum 96-98% Fluoride 93-95%
Arsenic (+5) 94-96% Lead 96-98%
Bacteria 99+% Magnesium 94-96%
Cadmium 95-97% Mercury 95-97%
Calcium 94-97% Nitrate 92-95%
Chlorine 90-95% Phosphate 97-98%
Chloride 90-95% Silver 95-97%
Copper 96-98% Sodium 94-98%
Cyanide 90-95% Zinc 96-98%

The Water Quality Association describes the "final barrier" as "the use of drinking water filtration systems to ensure quality drinking water is available at the water faucet". Use of the "final barrier" can address the following:

Focus On The 1% percent

Only one percent of the water you use actually goes into your body. This is why providing water treatment at a central location to drinking water quality standards is wasteful. After all, 99 out of every 100 gallons of municipal water is used to water lawns, flush toilets, fight fires, wash clothing and automobiles, showering, brushing and a host of other external uses.

By focusing on the 1% of the water used to drink, it becomes much easier to protect you and your family from the harmful contaminants listed below:

Specifications / Both Models
System Capacity 50 GPD
Tank Capacity 4.4 Gal
Rejections 98%
Pre-Filter SF5-10
Pre-Filter Carbon Block
Pre-Filter GAC
Post-Filter GAC
Membrane TFC
TDS 2000p.p.m. max
Feed Pressure 30-100psi
Hydrogen Sulfide None
Feed Water PH 3-11
Water Temp 0-80F
Iron 1 ppb max
Hardness 10-12 gr max
Voltage 110vac 50 hrz

Well Water

If you enjoy a suburban lifestyle or live in a farming community, your water quality may be significantly challenged with:

Okay... RO is the best technology but, Why Titan Waters technology? 

Two Models To Choose From:

Titan 4-Stage P-4 Reverse Osmosis

Titan 4-Stage BP-4 Reverse Osmosis with Booster Pump

Why a Booster Pump maybe required - Model Titan 4-Stage BP-4

The Titan booster pump is designed for low water pressure, cold water, and high TDS applications. By boosting the pressure to the membrane it is able to overcome the issues usually associated with under sink R/O’s and wells. The most common problems is well system pressure. Most well systems are designed to operate at 40 to 60 psi when most under sink membranes are rated at 65 psi for maximum output. This means that a conventional R/O unit would be trying to operate at an average of 50 psi. The Titan booster pump boosts the incoming water to about 80 psi allowing you to achieve maximum performance from your system. The second issue with most units is high TDS, the higher the TDS the more pressure is needed to achieve pure water. With higher pressure you are able to press the pure water through the membrane. As explained above, the Titan booster pump delivers more pressure to the unit to overcome these issues. By adding pressure the membrane will produce more water overcoming this loss.

Water Contaminant Reduction:

Built - Tested And Assembled
In The U.S.A.

Reverse osmosis water softener also reduces contaminants found in a household's water supply such as:
Arsenic (Pentavalent) <=50 ppb, Barium, Cadmium, Cyst, Fluoride, Chromium (Hexavalent), Lead, TDS, Chromium (Trivalent), Nitrate/Nitrite, Radium 226/228 and Selenium